When overhead cranes break down, so does productivity. And if you’ve been there, you know how costly lost production time can be.
But I offer you five practices – from inspections to crane upgrades – that will reduce the risk of crane breakdowns and downtime:
Crane Operator Training
While operator training may not immediately come to mind as a strategy for reducing crane downtime, I put training at the top of my list. When crane operators learn to run a crane the way it was designed to work, it will last longer. Bad operating practices or habits, on the other hand, wear down parts ahead of schedule.
A good example of a bad operating habit is side pulling – that is, initiating a lift at an angle rather than from a true vertical orientation. Side pulling increases wear on sheaves, rope pulleys, wire rope and the rope drum, an essential and expensive part meant to last the life of a crane.
Replacement rope drums must be made to order, adding to the length of downtime. And while wire ropes are considered a consumable component, side pulling shortens their life and raises the risk of dropped loads.
Whether you conduct them yourself or hire a crane service provider such as Konecranes, periodic inspections reduce downtime while identifying issues when they can be most easily, and cost-effectively, corrected. Beware: Depending on your provider, periodic inspections may not cover critical systems that require disassembly, such as gearboxes, bottom blocks, load brakes and hoist motor couplings. Ask your service provider when these systems should be inspected to avoid downtime and catastrophe.
As a complement to inspections, follow OEM specifications for preventive maintenance of your overhead cranes. Just like changing the oil in your car, preventative maintenance is one of the most important steps you can take to keep your equipment running long term.
As cranes get older, parts and technology become obsolete and difficult to replace. Crane upgrades or modernizations enable you to avoid the lengthy downtime of repairing outdated equipment. And by updating your cranes with new controls, you take advantage of the latest technology, extending the useful life of your overhead cranes, increasing productivity and enhancing safety. Plus, you’re saving money compared to the cost of buying a new crane.
Remote Monitoring Technology
Remote monitoring technology, such as TRUCONNECT® by Konecranes, continually monitors in real-time the operation and condition of your overhead cranes. This technology tracks actual usage, including the number of overloads, and is a more accurate gauge than the calendar of when to conduct inspections.
For more information on ways to reduce crane downtime, visit the service section of the Konecranes website.