You are here

Equipment

VİNÇ SATIN ALMA SÜRECİNDE HANGİ NOKTALARA DİKKAT EDİLMESİ GEREKTİĞİNİ BİLİYOR MUYDUNUZ?

VİNÇ SATIN ALMA SÜRECİNDE HANGİ NOKTALARA DİKKAT EDİLMESİ GEREKTİĞİNİ BİLİYOR MUYDUNUZ?

Serhat Duzcu
Proje Mühendisi

Vinç alırken dikkat edilmesi gereken 3 ana faktör vardır:

Bir vinç kayda değer bir yatırımdır ve satın alma kararının uzun vadeli yansımaları vardır. Vincin gerçekleştireceği işi doğru analiz etmek bile bu karar kadar önemlidir. Bu ipuçları doğru ekipman seçimi yapmanızı sağlar.

HANGİ DURUMLARDA ÇELİK HALATLI VİNÇ YERİNE ELEKTRİKLİ ZİNCİRLİ VİNÇ TERCİH EDEBİLECEĞİNİZİ BİLİYOR MUYDUNUZ?

HANGİ DURUMLARDA ÇELİK HALATLI VİNÇ YERİNE ELEKTRİKLİ ZİNCİRLİ VİNÇ TERCİH EDEBİLECEĞİNİZİ BİLİYOR MUYDUNUZ?

Hıdır Erdoğan
Proje Müdürü

 

Kaldırma işlemleriniz için elektrikli zincirli vinç veya çelik halatlı vinç satın alma sürecinde iseniz, her zaman uygulama, kapasite, çevre ve yapılacak iş döngüsünü dikkate alın. Yanlış kaldırma ekipmanı uygulaması büyük olasılıkla fazladan bakıma ve durma süresine neden olacaktır – bunların hepsi de yüksek maliyet ve düşük verimlilik sonucunu doğuracaktır.
     
Çelik halatlı vinç ve zincirli vinç arasındaki ana farklılıklar özetle şöyledir:

DO YOU KNOW WHEN TO USE AN ELECTRIC CHAIN HOIST RATHER THAN A WIRE ROPE HOIST?

DO YOU KNOW WHEN TO USE AN ELECTRIC CHAIN HOIST RATHER THAN A WIRE ROPE HOIST?

Ananth Raghunath
Sales Manager - Industrial Cranes

If you are in the process of purchasing an electric chain hoist or wire rope hoist for your lifting tasks, always consider the application, capacity, environment and the duty cycle. Lifting Equipment which is applied the wrong way will likely require excessive maintenance and cause downtime - all resulting in higher cost of ownership and reduced efficiency.

How to Lift a Load Properly

How to Lift a Load Properly

Bob Mounsey
Technical Trainer

One simple process applies to every single load.

Operators who consistently lift loads the right way are able to prevent accidents, reduce wear-and-tear, and avoid unnecessary repairs. Nevertheless, almost a quarter of crane operators don’t know how to lift a load properly. Often inexperienced or under-trained, these operators put themselves and others at risk, as poor lifting form can result in minor accidents, like slings coming off, and major safety hazards, like free-falling loads.

How to Choose the Right Lifting Attachment for Your Load

How to Choose the Right Lifting Attachment for Your Load

Mark Sadler
Technical Instructor, Konecranes USA

Is your lifting attachment right for your load? Get the training you need to know for sure.

Most overhead cranes can accommodate any number of lifting attachments. As long as they fit the hook and don’t exceed the crane’s capacity, various lifting attachments are likely to work in the short term. But just because a lifting attachment appears to be doing its job, that doesn’t mean its performance is optimal.

Goliath Gantry Cranes: The Heart of the Shipyard

Goliath Gantry Cranes: The Heart of the Shipyard

Jussi Rautiainen

Goliath gantry cranes are the heart of shipyards. The largest of the shipyard cranes, they lift into place the massive assembly blocks that form the platform or hull of a ship.

No specific dimensions or lifting capacities define when a crane rises to the classification of Goliath crane, but there’s general agreement that it must be of gantry design and engineered to perform the heaviest assembly lifts at modern shipbuilding dry docks and offshore yards.

What Is Load Float?

What Is Load Float?

Jim Suchor
Area Sales Manager, Central USA Workstation Lifting Systems

Improving the efficiency, safety and ergonomics of material handling

Load float is a capability of workstation air balancers that enables operators to safely, ergonomically and efficiently conduct repetitive, high-cycle material handling tasks. Especially helpful in assembly operations, the load float feature enhances operator movement and promotes precise load positioning, which is particularly beneficial for lifting and placing fragile items.

Which Overhead Crane Pendant Is Right for You?

Which Overhead Crane Pendant Is Right for You?

Adam Powell
Service Branch Manager, Springfield, OH

When it comes to commonly replaced crane parts, the overhead crane pendant is one of the most frequently broken and replaced. That’s because the pendant, the control unit for the crane, undergoes more handling than any other component.

In my many years of crane repair experience, I’ve found a high percentage of crane breakdowns involve the controls. When I get a call to repair a broken down industrial crane, the pendant station is typically the first place I check.

Pages

Subscribe to RSS - Equipment
Content bottom